| New one piece Small spline long tip Close Ratio Input
Shaft $150.00
photo |
| New one piece Small spline long tip Wide Ratio Input
Shaft $150.00
photo |
| New one piece Big spline long tip Close Ratio Input
Shaft $150.00
photo |
| New one piece Big spline long tip Wide Ratio Input Shaft
$150.00
photo |
| 25 tooth close ratio 3rd gear $100.00
photo |
| 25 tooth wide ratio third gear $100.00
photo |
| 28 tooth close ratio second gear $100.00
photo |
| 31 tooth wide ratio second gear $100.00
photo |
| Low and second syncro assembly for close or wide ratio
toploader. $125.00
photo |
| 3rd and 4th syncro assembly for close or wide ratio
toploader. $ 110.00
photo |
| Wide or close ratio low gear 32 teeth with 4 oil relief
holes. $125.00
photo |
| Reverse idler gear for close or wide ratio toploader
photo |
| Close ratio cluster gear. Fits all Close ratio
toploaders from 1964 through 1973 $185.00
photo |
| Wide ratio cluster gear. Fits all Wide ratio toploaders
from 1964 through 1973. $185.00
photo |
| 1 1/16" small shaft front bearing retainer with seal and
gasket $50.00
photo |
| 1 3/8" big shaft bearing retainer with seal and gasket
$50.00
photo |
| Low and second sycro assembly for close or wide ratio
toploader. $125.00
photo |
| 3rd and 4th syncro assembly for close or wide ratio
toploader. $ 110.00
photo |
| Standard type front bearing 9 roller balls $35.00
photo |
| Standard type rear bearing 7 roller balls $35.00
photo |
| New case hardened cluster gear shaft $20.00
photo |
| Reverse idler gear for close or wide ratio toploader.
$50.00
photo |
| Best quality forged bronze blocking rings available.
These are far superior to the cheaper die cast rings offered
by most other vendors. (set of 4) $50.00
photo |
| New shift forks for 3rd/4th gear and 1st/2nd gear. Fits
all toploaders from 1964 through 1973. Also fits overdrive
toploaders. $150.00 pair $75.00 each
photo |
office (580)
229-2856
